How to Select Electric Heaters
Electric heaters have a wide range of advantages, including lower initial cost, low maintenance for homeowners and an efficient way to warm your home. They are also easier to use than heating systems which require venting.
They are especially beneficial If your electricity provider provides Economy 7 because the less expensive off-peak tariff can reduce the cost of heating.
Temperature Settings
Ideally your electric heater will enable you to set the temperature you want, and then keep that temperature constant without the need to switch it off and on. This will decrease energy use and save you from entering the wrong room or leaving one that's too hot. Find a thermostat that has the ability to set a timer, should it be available.
When choosing an electric heater, be sure that it's designed for the space you're using it in. A heater that is too small will have to run for longer in order to reach the desired temperature. This can waste energy and could cause your space to overheat. Utilize our calculator to determine the ideal heater size for your space in terms of watts per sq. foot.
Also, make sure that the knobs that regulate temperature are easy to adjust and reach. You may have to remove screws or peel back insulation to reach the knobs, if they are recessed. This could be a challenge. It's also important to check the recommended temperature range for safety and efficiency reasons. Temperatures below 120 degrees could trigger bacteria growth and increase the risk of scalding, while temperatures over 140 degrees may be a fire hazard.
The Everhot is a sleek compact heater that is that is designed to be used in conservatories or, as the company puts it: "annexes, holiday cottages narrow boats and shepherds' huts as well as Glamping pods." It can reach temperatures of up to 200C, making it a good option for cooking and heating. It has a timer and an ECO mode, which optimizes power and heat settings to make it more energy efficient.
It is also very quiet. There's no noise from fans or whirring sound when changing the settings. This makes it an excellent choice for bedrooms and living rooms. It also has a few other convenient features, including an inbuilt nightlight that turns blue when the heater is turned on and a built-in humidifier that can be set to intermittent mist mode to create a subtle effect. Realistic electric wood Stove 's also durable and safe and comes with a tip over shutoff switch and an overheating protection that automatically shuts the unit off in the event of overheating. It's also UL-listed for safety.
Safety
Electric heaters should be used with caution. Children, the elderly, and people with chronic illnesses or immune system disorders are at a greater chance of being poisoned by carbon monoxide as well as fire hazards created by heaters. Additionally, children and pets can knock over a heater, leading to injury or death.
ESFI recommends checking a heater's plug, cord and outlet on a regular basis. Find indications of damage, such as a cracked or loose plug or a frayed cord. If the cord or outlet feels hot, stop using it and call a licensed electrician to repair it. Also, never plug in multiple electrical devices at the same outlet, including the use of a space heater as it could overload the outlet and cause overheating.
It is also a good idea to use only heaters that are registered or labelled by a national recognized testing laboratory, such as UL. These products are more likely than others to comply with voluntary safety standards. Avoid placing a heater near material that is flammable, such as carpets or textiles. Maintain a minimum of three feet between the heater and combustible material. Also, do not place a heater in the bathroom or kitchen and do not use it if you're in a wet state.
Also, always plug in an electric heater directly to a wall outlet. Never use a power strip. If you have to use an extension cord, make sure you choose the cord that is the shortest and most heavy-duty made of 14-gauge wire. Look for outlets that are sagging since this could indicate an overloaded circuit.
Keep an electric space heater at least six inches away from anything that could cause. It's also a good idea to place the space heater on a flat surface instead of placing it on tables, cabinets or furniture, as they could cause fire if it overheats. The last thing to do is disconnect and shut off the heater before leaving the room.
Electric heaters are a great method to cut down on energy consumption and avoid injuries. Electric heaters are often used by facility managers to provide extra heat in offices and common areas when temperatures drop. Preferred Climate Solutions can install and service indoor or outdoor electric heaters to help ensure that your workplace is as comfortable as it can be during these cold winter months. Contact us for more information about heating solutions.
Energy Efficiency
When you are choosing an electric heater that is portable take into consideration its energy efficiency. This refers to the amount of electricity needed to generate the desired heat output. Heaters that use less electricity are considered more efficient, and this could help reduce the overall cost of heating a house or business.
The heating element is used in a majority of electrical heaters to convert electrical energy into warmth. It is usually composed of a ribbon or coil flexible heater or tubular element that releases heat when a current passes through it. The amount of heat generated is contingent on the heating element and the method used by which it transmits heat (convection or radiation).
If you're concerned about the effect on the environment, choose one that utilizes green energy sources. This could be a renewable source of power or a substitute for fossil fuels like wind or solar.
The energy efficiency of an electric heater also varies on where the electricity comes from and the method of generation. Electricity derived from a solar or wind power plant is more efficient than electricity that is produced by burning fossil fuels in a power station.
In addition to choosing a heater that uses an environmentally friendly type of energy, you must also select one that has a variety of built-in energy-saving features. They could include automatic shut-off systems in the event of excessive heat or if the unit is accidentally tipped over.
These safety measures can help to protect your family or employees and they could also contribute to lower energy bills by assisting you in avoiding excessive usage. Many portable electric heaters operate quietly, which makes them ideal for bedrooms, offices, and other areas where you need a peaceful atmosphere.
Electric heaters can also save you money by reducing your maintenance calls. Gas heaters are more expensive to fix than an electric model and the cost of maintenance can add up over time. Electric models are usually cheaper to maintain and often have more advanced features to assist you in saving energy.
Installation
Electric heaters rely on the Joule principle that converts electrical energy into radiant warmth that warms a room. They're also extremely efficient and economical when compared to other types of heating systems, particularly gas. However, they aren't suitable for every household and can put a strain on an existing electricity system. Therefore, it's recommended to have an expert electrician verify that the current system is able to handle the additional demand of an electric wall heater before installing one.
When choosing an electric heater you must consider a variety of aspects, such as the size and type of the heater, as well as the space in which it will be placed. The type of heater you select will determine the price to operate it. A baseboard heater that is electric can cost more to operate than the space heater or portable unit however, it will provide more uniform warmth and doesn't require chimneys or vents.
Electric fan heaters feature an air blower that circulates hot air through the room. This type of heater is the cheapest, but can be noisy and takes longer to warm rooms.
Choose a space heater with a built-in thermostat. This feature lets you set a temperature target and then shut it off when the temperature you want reached. This feature can help reduce your energy usage and also reduce the need to turn the heater on and off.
Before you attempt to install an electric heater, make sure that the power is turned off at the breaker panel. Also, confirm that the circuit is off by using a tester. Then, mark the spot where you intend to mount the electric heater on the wall and cut a hole in the drywall. Utilize a drywall saw to cut off the required section, making sure not to cut any electrical pipes or wires.
Run a 14/2 cable with the same gauge as the wires that are already in use from the panel for the breaker to the wall opening. Remove about 1 inch of insulation off the ends of each conductor wire and connect them to an available screw in the outlet box. The wire you identify as the "line" by labeling it or marking it with a piece red tape, and connect it to the wire leads with the label "load" in the thermostat box.